The multi-stage fitness (beep) test is something most people did back in school. However, many need to learn more about the test, its purpose, or how to calculate the results.
This article will cover all you need to know about the test. It covers everything from the equipment you need to how to calculate the test results in various ways.
What Is the Multi-Stage Fitness Test?
The multi-stage fitness test has many names worldwide, including the 20-metre shuttle run, FitnessGram PACER test, PACER PACER test, and beep test. No matter what name you give it, the test remains the same except for slight variations.
The beep test is a continuous, submaximal exercise to gauge your aerobic capacity. The athletes must do continuous 20-metre shuttle runs in which they must cross the finish line before the beep sounds.
As an athlete, you will need to pick up the pace to reach the other side consistently. This is because the time between alarms will get shorter as the fitness test continues. These time intervals are called “beep test levels,” You will advance a level when the audio signal frequency rises.
The speed increase determines the beep test’s difficulty and intensity. You’ll find that the challenge gets tougher on your body over time.
Depending on the test version you use, these beep test levels often go up to 23 and last one to two minutes apiece. Before the first sound cue, be mindful of this information. Knowing when it will occur will help you estimate your speed and gauge how long the test will take.
Although there are numerous variations of the beep test, the most often used procedure starts with an initial speed of 8.5 km/h and increases the speed by 0.5 km/h every minute.
Due to its ability to quantify aerobic power, many sports athletes employ the fitness test. Here are a few sports in which players use this test: basketball, hockey, football, and rugby. Remember that this test does not apply to these sports; anyone can use it.
Why Do People Perform the Multi-Stage Fitness Test?

The beep test is a valid, standardised cardio-respiratory endurance test. Due to this reason, numerous organisations employ the exam for internal purposes. Many coaches use this method to test potential candidates for positions on their teams.
Sports teams can also use the beep test as a form of training and evaluation for players of varying skill levels. Many sports teams and personal trainers utilise the beep test to determine a participant’s or client’s maximum oxygen consumption (VO2 max).
The beep test is easy to employ and does not require specialised equipment. Hence, casual or recreational athletes can use this test to track their fitness and progress.
What Is VO2 Max?
VO2 max is just how much oxygen you can take in at once, or your maximum aerobic capacity. It’s a scientific way to measure how fit you are. In addition, it’s essential to figure out how long you can work out when you’re not sprinting.
To get an accurate reading of your VO2, you would need to be connected to a treadmill in a lab and wear a mask that could track how much oxygen you were using. However, most people won’t have access to a place like that.
Also, it’s not a good idea to devote hours to trying to make a simplistic testing machine out of parts from your local hardware store. The best thing to do instead is to use the beep test, which makes testing your VO2 levels simple and easy for anyone.
After you take the test, it’s easy to figure out your estimated VO2 max. You can do this by putting the level you got on the beep test into an equation.
Equipment Requirements for the Multi-Stage Test
To do a beep test, you’ll need a few essential items. These items are crucial because they help you get reliable findings during multi-stage fitness tests.
Once you have all these things and have set them up, you will be ready to do a beep test. You’ll need the following things to guarantee a smooth assessment.
A Proper Testing Environment
The environment in which the multi-stage fitness test is conducted is one of the most important factors that must be kept constant. As a result, you may rest assured that the findings are solid.
The 20-metre distance required for the beep test requires that it be performed indoors.
Therefore, it is preferable to conduct multi-stage fitness tests indoors, where one has more control over the environment and fewer potential influences, such as the running surface and the weather.
The downside of outdoor beep testing is that it may not accurately reflect your cardiovascular fitness because you may not run at your typical pace. Furthermore, the ground might be slippery or uneven.
Beep Test Audio and Loudspeaker

To conduct a valid test, you need a proper audio cue. Without the cue, the beep test would not be admissible. This is because athletes need to hear the signal to know how fast they need to move from one place to another.
Fortunately, you can listen to standard multi-stage fitness audio cues on sites such as YouTube and Spotify. Additionally, there are various beep test apps for all types of smartphones, which you can easily download and use.
Similar to the marking cones, a loudspeaker is a tool that helps a large number of people. If people relied on their laptop or phone speakers, they might not hear the cues properly, which could lead to the test taking longer and producing inaccurate results.
A loudspeaker could be used to ensure that everyone in the experiment can hear the changes in the frequency of the sound cues. This would make it impossible for the results to be ruined in any way.
Measuring Tape and Marking Cones
The multi-stage fitness test cannot be conducted without the use of measuring tapes and marking cones to guarantee that it is carried out in accordance with the proper standards.
Pick a spot to put one of the marking cones, then measure 20 metres from it. As soon as you have an accurate measure, set up a second cone to establish the beginning and end points of the test.
If numerous people take the beep test simultaneously, the boundaries must be marked with multiple cones. Runners can see the finish line easily since it will be marked by two lines of cones running parallel to one another.
How to Take the Multi-Stage Fitness Test
One of the many good things about the multi-stage fitness test is how easy it is to give. Verifying the participants’ results is the most challenging part because you need to detail each participant’s beep test levels to do that.
Now that you know how the test works and the equipment you need, here is a step-by-step breakdown of the test.
Step 1
First and foremost, you need to stretch for about 10 minutes. Stretching allows you to free up your body; without doing so, you might not perform optimally or hurt yourself.

Step 2
Mark out the starting and ending points using marking cones and a measuring tape.
Step 3
Stand on the line that indicates the starting point and play the audio player.
Step 4
As soon as you hear the beep, you can start running across the 20-metre field toward the endpoint (turnaround line). If you get to the endpoint before the audio cue, wait for the cue and then run back.
Step 5
You should keep running back and forth with the rhythm of the cue (shuttle runs). To ensure you successfully pass each fitness level, you should not be between the start and end points when the audio cue sounds.
If you fail to reach the next level within the allocated time, you will get one “failure,” but you can continue. You need to stop the test if you fail to reach the next level two consecutive times. On the other hand, reaching the line before the second beep automatically cancels your failed attempt.
Step 6
Continue completing the beep test levels, ensuring you reach both ends of the marking cones until you become exhausted.
Step 7
Once you fail to reach the higher levels or complete the test, ensure your results (levels and number of shuttle runs) are recorded to calculate your cardiovascular capabilities.
Scoring the Multi-Stage Fitness Test
You can find beep test scores in three different ways. Most online resources choose to show their results using all three measuring methods. However, if you only find one, make sure you know which one because the results are very different.
Here are the three ways they can be represented
- VO2 max
- Total distance (metres)
- Level achieved
Multi Stage Fitness Calculator
Calculating VO2 Max
The mathematical formulas below demonstrate how to predict the VO2 max using the original calculations by the first test users, Leger and his colleagues.
The first formula is for calculating VO2 max in children. You calculate this by using the fastest 20m shuttle speed (km/h–1) and the child’s age (ensure to round the age to the nearest integer).
- VO2 Max = 31.025 + 3.238 (speed) – 3.246 + 0.1536 (speed)
If you want to calculate the VO2 max levels in an adult, you use the formula below. Ensure to use the fastest speed (km/h-1)
- VO2 Max = 23.4 + 5.8 (speed)
For calculating the VO2 max of an adolescent (18 years), you can use the formula:
- VO2 max = –27.4 + 6.0 (speed).
The formulas above might be confusing for some. If you are struggling with getting your results, you can easily use the many VO2 max calculators on the internet.
Calculating Total Distance
When reporting results from a multi-stage fitness test, the total distance is usually the easiest, most popular, and most reliable metric.
The easiest way to figure out how far an athlete went is to count how many shuttle runs they did and then multiply that number by 20.
For example, if you perform 25 shuttles, multiply this number by 20 to get the total distance travelled (25 x 20 = 500 m).
Calculating Level Achieved
To get your score using this method, you need to figure out the level reached and how many shuttle runs and shuttles were completed at that level.
For example, if you got to level 16 and failed at the 7th shuttle in that level, then your score would be Level 16, Shuttle 8. This applies regardless of where you are before you fail the shuttle run. So, if you were halfway through with shuttle 8, it still counts in your result.
Conclusion
The multi-stage fitness (beep) test is a fantastic way for everyone, from regular people to athletes, to check their cardiovascular endurance and maximum oxygen uptake (VO2 max)
The test is pretty straightforward, and anyone can do it as long as they have the determination. The biggest challenge you might face is computing the results, which you can easily do with proper attention to detail.

